Return valid channels for the country specified.Īrg 2 is the band(a or b) (editors note: only b seems to be recognized in dd-wrt v22) Return valid channels for the current settings. Return valid channels for the current settings is nice.
Perm_etheraddr 00:90:4c:xx:xx:xx cur_etheraddr 00:12:17:xx:xx:xxĭeauthenticate a STA from the AP with optional reason code (AP ONLY)ĭo not restrict traffic to 802.1X packets until 802.1X authorization succeeds
Print driver software state and chip registers to stdout Send an 802.11h channel switch anouncement Manufacturing test: set carrier suppression mode.Īrg is channel number 1-14, or 0 to stop the test. Use 'wl country list ' for the list of supported countries
Use either long name or abbreviation from ISO 3166. Some can only be used in Client Mode and others only in Access Point (AP) Mode. This program has many more options than our WRT is able to process. Wds_remote_mac wds_wpa_role_old wds_wpa_role authe_sta_list Gmode_protection gmode_protection_control gmode_protection_cts gmode_protection_override
Phylist shortslot shortslot_override shortslot_restrict Scan_passive_time scan_nprobes prb_resp_timeout channel_qa Suprates scan_channel_time scan_unassoc_time scan_home_time Rateset roam_trigger roam_delta roam_scan_period Wsec_test tkip_countermeasures wsec_restrict eapĪuthorize deauthorize deauthenticate wsecĬhannels_in_country curpower scansuppress evm (Most wireless options can be set and monitored via the wl console program.) Generates a short list of all available wl commands. return error for set_clk attempt if the driver is not down Valid channels for 802.11b/g (2.4GHz band) are 1 through 14 4.84 (SVN5656), neuere Versionen bleiben da manchmal beim Upload hngen. Get the BSSID value, error if STA and not associatedĪp sta wet led wme pio 802.11d 802.11h rm cqa afterburner Tera Term ist eine Terminalemulation fr verschiedenen Terminals von DEC VT100. Return the list of available 802.11 bands Restrict traffic to 802.1X packets until 802.1X authorization succeedsĪuto - auto switch between available bands (default) Mode: Managed RSSI: -48 dBm noise: -97 dBm Channel: 6ĪP only: Get the list of associated MAC addresses. Print information about current network association. Removed the '1.5' name from the StopBit entry in the teraterm.ini file.
Serial port connection Removed the 1.5 stop bit in the serial port setup. Note: can be used in conjunction with 'wl txant' to set the transmit antenna. TeraTerm 2021.06.05 (Ver 4.106) Changes Increased max width of window from 500 to 1000 chars. Default is ccm.Īddwep ģ - automatic selection of antenna diversity Whether AES-OCB or AES-CCM encryption is used. Only when key length is 16 bytes/32 hex digits and specifies The encryption algorithm isĪutomatically selected based on the key size. added support for querying the status of DECSLRM and DECSCUSR by using the DECRQSS control sequence. The key must be 5, 13 or 16 bytes long, orġ0, 26, 32, or 64 hex digits long. TeraTerm 2015.12.01 (Ver 4.89) Changes The parameter check of the control sequence can be reinforced.
Spin: Num microsecs to delay between rssi samples Glitch Seconds interval between ACI scans when glitchcount is continuously high Choices are:Įnter: CRS glitch trigger level to start detecting ACIĮxit: CRS glitch trigger level to exit ACI mode Radio is off (WL_RADIO_SW_DISABLE 1 WL_RADIO_HW_DISABLE 0) Radio is on (WL_RADIO_SW_DISABLE 0 WL_RADIO_HW_DISABLE 0) Mark adapter down but do not reset hardware. Common Tasks Toggle radio on/off, restart, etc If you have multiple radios, then each one will have it's own interface, i.e eth2, eth3 Note For NEWD-2 builds, you must specify the interface when performing a command. Most of the wireless options can be accessed using the program "wl" via the console window.